This is a 5-Gauge Kit of Fuel Level, Ammeter, Temperature (mechanical), Hour Meter, & Oil Pressure Gauges and fittings for an SA-200 or SA-250 (with mechanical Temperature) Lincoln Pipeliner welder. Use 12-gauge automotive wire to/from the Ammeter and 14-gauge automotive wire on everything else.
THIS GAUGE SETUP IS DESIGNED TO SHUT-OFF YOUR WELDER IN CASE OF LOW OIL PRESSURE OR A HIGH COOLANT TEMPERATURE SITUATION.
***** VERY IMPORTANT *****
Follow the directions included with the Murphy gauges to set the oil pressure trip to just under 15 psi and coolant temperature trip to 235 deg F to shut-off your welder!!
The Kit contains:
1 – Fuel Level Gauge and Sending Unit BW1148
1 – Murphy Ammeter +/-60Amp Gauge BW296
1 – Murphy Temperature Gauge
BW1986-K is for SA-200 BW165
BW1999-K is for SA-250 BW351
1 – Hour Meter 10-80 Volts BW317
1 – 56-inch Braided Brass Hose Assembly BW56
1 – Run Tee, 1/8 Brass Fitting BW207
1 – Brass Elbow Pipe Fitting BW525
1 – Murphy Oil Pressure Gauge (0-75 psi) BW228
Call us with any questions 602-850-7399.