|Welder||Lincoln SA-200, Lincoln SA-250|
This kit is a DC Remote Box and Receptacle Kit to retrofit SA-200, SA-250 (THESE CODES ONLY: 7827, 7988, 8305, 8403, 8497, 8569. All other SA-250s use the AC Remote or AC Remote Kit), Pipeliner 200 (Diesel & Gas), and Classic I to work with a Remote. This kit uses a high-quality hospital grade 20A receptacle. The Remote box comes in Red and 2 premium colors: Gray and Black.
Wishing you could switch to Remote while your engine is running? There is an optional switch for this kit that will allow you to do that. The optional switch is a double-pole, silver alloy contacts Toggle Switch designed for the high DC voltage that runs through your shunts. The optional switch is rated for 20A 250VDC and will last longer than the regular switch. NOTE: While the engine is running, the Remote should be plugged-in BEFORE switching to Remote from Local or Off. Not plugging in the Remote first will result in arcing and voltage loss at the remote plug or extension cord plug. While this switch will handle switching while the motor is running for many more switching cycles than the regular switch, when possible, it is still recommended that you follow the normal procedure of plugging in the remote before starting the motor.
******** CAUTION ********
1. DO NOT plug-in or unplug the Remote while the machine is running.
2. DO NOT immerse the Remote or extension cord in water. Minimize the exposure of the Remote to moisture as the remote is NOT waterproof.
3. DO NOT plug the Remote into wall a/c power (110V/120V or 220V/240V).
Need an extension cord to run between the Remote and the Adapter then click here.
Call us with any questions 602-850-7399.