1-Wire Alternator with 1/2" Pulley for Lincoln SA-200s and SA-250s
This is a 1-wire alternator that charges by RPM speed and is rated for 63 amps. Only one wire is needed from the alternator battery post to the starter solenoid, no other wires are needed.
It comes with a 1/2" wide crank pulley, but if you have an older Lincoln SA-200 with a F162 motor, you will need to replace that 1/2" pulley with a 5/8" pulley to match the size of your machine's crank pulley. The 1/2" to 5/8" pulley can be found here.
Upgrade Your Welder with Our Efficient 1-Wire Alternator
This 1-Wire Alternator with 1/2" Pulley is designed for use with Lincoln SA-200s and SA-250s welding machines. It is a high-quality replacement part that is easy to install and will help ensure that your welder is running at peak performance.
One of the standout features of this alternator is that it charges by RPM speed, which means that it will automatically adjust its charging output based on the speed at which your engine is running. This allows for a more efficient charging process and helps to extend the life of your battery.
With a rated output of 63 amps, this alternator is capable of providing plenty of power to keep your welder running smoothly. And because it uses a 1-wire system, you won't need to worry about messy wiring - simply connect the alternator battery post to the starter solenoid and you're ready to go.
The 1/2" pulley that comes included with this alternator is a perfect match for many Lincoln SA-200s and SA-250s. However, if you have an older machine with a F162 motor, you will need to replace the 1/2" pulley with a 5/8" pulley to match the size of your crank pulley. We also carry that pulley here, so you can easily make the switch.
Overall, this 1-Wire Alternator with 1/2" Pulley is a great replacement part for any Lincoln SA-200 or SA-250 welder. It is easy to install, highly efficient, and built to last.
Installation Video
| Free Shipping | Yes |
|---|---|
| Welder | Lincoln SA-200, Lincoln SA-250 |
