This is a 4-Gauge Kit consisting of Murphy Ammeter, Murphy Temperature (mechanical), Hour Meter, & Murphy Oil Pressure Gauges, fittings, connectors, connectors, and relay for an SA-200 or SA-250 (with mechanical Temperature) Lincoln Pipeliner welder.
THIS GAUGE SETUP IS DESIGNED TO SHUT-OFF YOUR WELDER IN CASE OF LOW OIL PRESSURE OR A HIGH COOLANT TEMPERATURE SITUATION AND THE RED LIGHT (OPTIONAL) WILL ILLUMINATE.
***** VERY IMPORTANT *****
Follow the directions included with the gauges to set the oil pressure trip to just under 15 psi and coolant temperature trip to 235 deg F to shut-off your welder!!
The Kit contains:
2 – Blue Male Terminal BW1876
2 – Blue Female Terminal BW1875
1 – Yellow Male Terminal BW1877
1 – Yellow Female Terminal BW1874
1 – 5-pin Relay Connector Plug BW1860
1 – Ammeter +/-60Amp Gauge BW296
1 – Murphy Temperature Gauge (different for the two machines)
BW1922-K is for SA-200: BW165
BW2012-K is for SA-250: BW351
1 – Hour Meter 10-80 Volts BW317
1 – 56-inch Braided Brass Hose Assembly BW56
1 – 5-pin Relay BW1117
1 – Run Tee, 1/8 Brass Fitting BW207
1 – Brass Elbow Pipe Fitting BW525
1 – Murphy Oil Pressure Gauge (0-75 psi) BW228
1 – Red Indicator Light
BW1922-K-L is BW1922-K above with indicator light BW1900
BW2012-K-L is BW2012-K above with indicator light BW1900
The optional indicator light, when illuminated, indicates there is a temperature or oil pressure issue that has shut down your engine.
Call us with any questions 602-850-7399.